Tuesday, March 17, 2020

Recruitment Scam

I am posting it to get these domain names into the search engines in the hopes that others will find this when searching and realize that it is a scam.  The relevant information from the below story is:

The Job Dice
thejobdice.com
sean@thejobdice.com
info@thejobdice.com
7 Park Row, Leeds, West Yorkshire, LS1 5HD
+44 01133280523

procaccia
pro-caccia.com
info@pro-caccia.com
care@pro-caccia.com
27 Old Gloucester Street, London, United Kingdom, WC1N 3AX
+44 20 3289 5498

Yesterday a friend received a call from a recruiter indicating that they were reaching out on behalf of a company that was interested in hiring her.  After a preliminary discussion, they scheduled a followup Skype call for the next day.

The next day the spoke in detail about the opportunity and it sounded great.  At the end of the call, my friend was told that they needed to register with the Recruitment company, for a fee, after which point her she would be put in touch with the company.



This sounds a little suspicious since a recruitment company would be retained by the employer and paid by the employer.

The company is thejobdice.com  https://thejobdice.com.

A quick search showed that the domain was registered December 12, 2019 (very recently) and that expires December 12, 2020.  What company only registers their domain name for 1 year.  Very strange.

The SSL certificate associated with thejobdice.com was a 3 month lets encrypt certificate, which is free and does not require any verification of the company, only verification of the domain name.  Very strange for a legitimate company to have this type of certificate.

The registration page which request payment is being hosted on the domain pro-caccia.com.  (https://pro-caccia.com/advance-payment/stripe185.html).  The page is designed to loop like stripe, but I am pretty sure that it is not.

And again we have a suspicious 3 month let's encrypt SSL certificate for pro-caccia.com.  My understanding is that with a service like stripe your Credit Card information does not go to the client website, but goes to stripe directly.  This is how they help websites maintain their PCI compliance... by allowing the website to not collect this sensitive information.  So this makes no sense.

Interestingly pro-caccia.com offers website design and resume writing services. They even have a page that describes their refund policy.  https://pro-caccia.com/refund-policy/ but the language is a little circular.

"All Procaccia vendors (product and service providers) are required to provide full, unconditional refunds to Customers up to 2 days from the day of purchase."

followed by

"A product or service provider may or may not decide to give a refund during this two days period."

Sure.  The Pro-caccia.com domain has been around since 2015, so perhaps this is a real company, that offers real services, and had a bad actor that they are hosting.  Or maybe that are a real company that is a bad actor considering the they offer resumes services, and the scam is about recruitment of resume services.

So in the end this SCREAMS scam.  

Friday, June 20, 2014

Subscribing to calendars

I am a huge fan of calendar subscriptions.  It is so much better to subscribe to something that to import it, so that the maintainer can make changes and have then automatically reflect on everyone else's calendars.  Many of us have multiple iPhone, iPad, OSX devices though and would like to see the subscriptions reflected in multiple places. So note the following:

If you subscribe to a calendar using your IOS device, the subscription only appears on that device and you need to subscribe on each device.

However, if you use the Calendar application in OSX to subscribe to your calendar, you have the option to add the subscription to iCloud, which in turns adds it to all devices that are syncing Calendars with your iCloud account automatically.  This is a much better solution.

Unfortunately, if you don't have OSX you are out of luck.  The browser based iCloud access does not allow subscriptions to be added, and you cannot add a subscription to iCloud through a mobile Calendar app, so this really only works for Mac users.


Saturday, April 6, 2013

ClamAV, Ubuntu, Symbolic Links and AppArmor

I have just been having the most annoying time getting clamav to work properly in AWS on Ubuntu 12.04.  On one system it would start and log properly, but freshclam would fail to log.  On another system it wouldn't start nor would freshclam run.  In all cases it was displaying errors that it could not open the respective log files for append.  In one case, I mounted a volume and tried to create a symbolic link to the new volume and move /var/log/clamav there, and it would work in the default location but not in the new location. Permissions were fine, ownership was fine.  Then I discovered apparmor.  I needed to modify the clamav and freshclam profiles in apparmor to allow the two applications to write to the various directories to which they needed access.  In one case clamav had permissions from the install but freshclam didn't.  In another case, neither had permissions.  And in the case that I tried to use a symbolic link, I actually had to add the actual path to which the link pointed into the apparmor profile for both clamav and freshclam.

So simple, yet cost me so much time, and reading the types of issues that others are having, I suspect that this is causing them the same grief.

Hope that this helps someone.

Tuesday, October 23, 2012

Disabled iPhone

Well, it finally happened, one of my kids changed the lock code on their iphone, promptly forgot the new code, then tried enough lock codes to disable the phone.  Unfortunately, once the phone is disabled, there does not appear to a way to un-disable it and try more lock codes.

The only option at this point seems to be to erase the phone and restore from backup.  I did not have iTunes available when it happened so I was unable to plug it in to my computer.  Fortunately I did have Find My Phone active AND had iCloud backups active, which enabled me to use Find My Phone on a different device to locate and erase the disabled phone, then restore the phone from the last iCloud backup all without connecting to the disabled phone to a computer.  There does not seem to be a way to check when the last backup was run except by doing a restore which would have been a nice thing to be able to to prior to wiping the phone.  Fortunately, when I went to restore I found that the most recent backup was current.

If the phone is registered with iTunes on a computer, I believe that I could have plugged in, run a backup, then a restore, which yielded the same result, perhaps a better result, at least a faster result, as I would not have then had to download all the apps and music and everything else that is not included in an iCloud backup.

A few features that I would love to see:

1. Remotely change a lock code from an iCloud or Find My Phone client.  I should be able to use my Apple ID to make changes to my phone regardless of the lock code.

2. Remotely un-Disable the phone, again using the Apple ID.

3. Check the state of my backups from a browser.  I probably could have added the Apple ID to a different device as a new iCloud account to get access to the list of backups, but this seems a bit of a hassle when there is an iCloud portal that could easily.

4. Remotely trigger a backup process so that if a device is lost or disabled, one can be sure that they have a current copy device. Along with this perhaps also have the option to change what is backing up as your daily "just in case" backup settings bay be more restrictive for space reasons than the backup that you would run manually knowing that you were doing a full restore.

my $.02.

Tuesday, September 18, 2012

Loading iBooks on the iPhone/iPad/iTouch

Historically I have used a somewhat convoluted method to manage my eBooks.  I keep my books in ePub format and load them into my iPhone a few at a time when I tether my iPhone, maintaining the library on my PC.  I recently started using a Mac however and of course found that I could not use the iPhone on both computers and thus would have to choose one to sync with and use that computer to load my ePub files.  This seems a little counter-intuitive with the whole iCloud push in which I never connect my iPhone to my computer anyway.  Time to find a workaround.

The first workaround is to email yourself the ePub file (and I suppose any file that iBooks will read) and then open the attachment using iBooks and it automatically loads the ePub into iBooks.  Easy.

Better yet, if you use Dropbox (and I suspect any of the similar services) you can access your ePub files through the service and open them with iBooks, also resulting in the file being automatically loaded into iBook.  This method has the advantage or always having access to your entire library so long as you have dropbox and an internet connection.  Even Easier.

Note that for this to work your ePub files will have to be DRM-free.  I'm sure that you can figure that part out yourself.

Friday, March 30, 2012

iCAL and Exchange

We have one user, me, for whom our Mac users cannot seem to access the calender from iCal.  This was driving me crazy for a while, but the problem was really really stupidly simple.  I had my work day set from 6a to 8a rather than from 6a to 8p, so most of the day was 'unavailable' because it was outside of my work day and iCal, unlike Outlook on the Mac, doesn't show anything that is scheduled during unavailable time so it appeared that my calendar was just not visible.  Dumb Dumb Dumb.

The details:

Exchange Server hosted with Intermedia
PC users on windows 7/Outlook 2010
Mac users on Lion/Outlook 2011 and iCAL


Thursday, March 29, 2012

Apple MacBook Pro and WIFI Issues

We have a number of users on the local network, most of whom are on MacBook Pro laptops, who have been having an issue in which their WIFI drops periodically and must be manually reselected after which a few minutes later, it drops again.  It happened intermittently, and more in certain parts of the office than others.  I did some research and found lots of postings of people having issues with their MacBook Pro laptops and lots of 'possible' solutions to the issue, not of which really helped.  Ideas like resetting the NVRAM and creating new 'Locations' with only one SSID.   Nothing helped in our case so I started to do my own research.

Our WIFI Setup is as follows:
Cisco 981w router with integrated Dual Band, Dual Radio WAP
2 SSIDs, each broadcasting on both 2.4GHZ and 5GHZ
Most clients authenticating with WPS2/Personal/AES

I made some interesting observations.  First, the MacBooks seemed to all be connecting to 2.4 GHZ, even though it is really congested and the 5GHZ band is wide open.  The client itself is pretty dumb and has no way that I could find to tell it which frequency to favor.  It automagically figures it out based on signal strength.  Interestingly, the places in the office with the biggest issues are where the signal is the weakest.  There is also not a way to tell it to use a, b, g, or n, it's pretty much all or nothing.

So the first thing I did, which is sort of the only thing I did, was to change the WAP in the router so that the 2nd SSID was only broadcasting on 5GHZ which forced users who connected to that SSID to use 5GHZ.  This would prevent the MacBook from trying to jump between them if it thought that it had a stronger signal bands (with the same SSID) if it thought that it had a better signal.  Problem solved.  Damn that was easy.

Next step is to change my 2 SSID (guest, and corp) to 4 SSIDs (guest2, guest5, corp2, corp5).  I suspect that with some additional troubleshooting I could figure out why specifically was causing problems when the same SSID is on 2.4GHZ and 5GHZ, but this solves my problem in this environment and I have other things to do.  Hope this helps.

Wednesday, March 21, 2012

MacBook Pro and MacBook Air restore

I have been configuring a lot of MacBook Pro and MacBook Air laptops for people in the office so I finally decided to make my life easier by creating an image of a baseline install from which I could image the new machines and save myself a lot of time and effort.

So the concept is simple:

- Go through the setup process
- Create a generic account like 'administrator'
- Install any system updates
- Install baseline software (Office, Firefox, Dropbox, Printer/Scanner Drivers, etc)
- Attach a USB drive
- Reboot into the Lion Install Partition
- Go into Disc Utility
- 'Restore' the system partition to a partition on the USB drive

Now any time I need to re-install a laptop I can boot into Disk Utility and 'restore' from the USB partition to the laptop.

Now the question is whether I can take a 'restore' from a MacBook Pro and use it to install a MacBook Air.  And the verdict is... Yes.  This seems to work.  Oddly though the restore 'failed' at the end, but verifying the partition showed that it was clean, so I booted into it and everything appears to work properly.

I have not tried restoring to a MacBook Pro yet, so I do not know if the error is specific to the Air.  I'll update the post when I know.

Monday, March 19, 2012

iCloud restore and missing Backups

I recently upgraded am iPhone 3GS to iOS 5.1.  A week later, the phone started acting badly.  I succeeded in backing it up, then tried to reapply the firmware, and it would not update, leaving me with an effectively dead phone.  I took it to apple and ultimately I very unhappily ended up paying $160 for a refurbished phone which came with iOS 5.0.  When I went to restore the phone from iCloud it reported that there were no available backups.  Huh?  I know that there are backups.  On a hunch I setup the phone as a new phone, updated it to 5.1, then erased it, and tried to setup and restore from iCloud again and this time is saw all the backups.

Interesting lesson.  iOS 5.0 cannot see iOS 5.1 backups.

Starwood SPG Flights

I am a huge Starwood fan.  I love the hotels and I love the rewards. For the most part I have been really happy with the hotels that I could book using Starwood Points and with the Transfer rates to the various airlines.

However... I just had a really stupid and annoying experience trying to book a flight through SPG Flights.  I wanted to fly Jet Blue, which is not an airline to which Starwood points can be transferred.  However SPG flights does allow you to book Jet Blue flights, so I went through the SPG Flights reservations system, found my flight, and clicked "sign-in and continue" and I was given a Brower error page.  Not a response from the web server, but from the browser itself that there was an error with the flight.  Very annoying.  I tried again, I tried a different browser, always the same error.  The URL is clearly going to Starwood, to a login URL, passing a token, and passing a URL back at SPG Flights to which the user should be redirected after logging in.  The problem is that it didn't work. The URL is broken.

Annoying but not the end of the world.  I called the toll free number to book the flight, but they are not open after hours or on sundays (it was Sunday night).  Damn.  Tried again in the morning.  The flight was now 5000 points more expensive.  That is really annoying.  Called the number and was told that they cannot book flights by phone, it has to be handled through the website.  Wow.  Tried modifying the redirect URL and finally removed the 'S' from HTTPS, and suddenly I got the login page and was able to confirm the flight.

Asked the representative to credit me 5000 points since their broken website prevented me from booking the night before and was given a run around about how they can't credit me because it wasn't their problem, they hire a third party.  Wow again.  Tried the supervisor.  Same story. No point.

So Starwood uses a third party to provide the SPG Flights service, the third party provides terrible service and created a website that is effectively unusable unless you hack the URL to which they are trying to redirect you, they know that there is an issue, and they don't really care how it is inconveniencing their clients.  That is a HUGE minus sign on what has historically been pretty good service.

Tuesday, March 13, 2012

VOIP over WIFI

Last year we built out a network and decided that we would try going entirely wireless in the office.  WIFI for all the computers and WIFI for the phones using VOIP over WIFI.  We have the phones running over a Towerstream 10MB wireless circuit and our office running over a Time Warner Cable 50/5 circuit.

The short of it was that the Cisco 525G2 phones, which have built in WIFI, just sucked.  Call quality was terrible and after many months people just stopped using them entirely and would do everything on their cell phones.  I thought for a while that it was the Towerstream circuit as I saw some dropped packets and inconsistent latency, and had them out a bunch of times to resolve the issues, but the problem persisted, so then I turned to troubleshooting the WIFI.

In troubleshooting the problem I discovered a few things.  When I scanned the WIFI channels using inSSIDer and found that there were no less than 25 2.4GHZ signals on all channels being picked up in my office (have to love dense urban areas).  5GHZ however was barely in use.  Unfortunately the Cisco 525G2 phones only support 2.4GHZ so I was unable to see if WIFI was the issue or if interference was the issue.

I installed Ethernet to a bunch of the phones and they worked great.  IN the process of installing ethernet, I freed up a WIFI bridge that supports 2.4GHZ and 5GHZ, so as an experiment I put the bridge on 5GHZ and hooked it up to the Ethernet port on one of the phones, and the call quality improved dramatically.

The takeaway is that VOIP over WIFI seems to be VERY susceptible to interference.  2.4GHZ was unusable for us, but 5GHZ seems to work on initial testing, but in our case it is far less congested so I can't say for sure whether it is a 2.4GHZ/5GHZ issue or a congestion issue.  Wired however is by far the best so if considering VOIP, try to wire it, if you can't wire it, check your congestion with a tool such as inSSIDer and make sure that you have open channels (and not that this can change without notice if someone changes a setting on their WIFI).  If you need to use 5GHZ, use a bridge, possible with a switch if you need to connect multiple phones.

Friday, January 6, 2012

Shure does it again

So once again one of my Shure 530 earbuds stopped working properly so I sent the headphones back to the company and 4 days later I had a brand new pair of 535s. No charge, no questions, no drama.  That is a 10 out of 10 for customer service.

Friday, December 2, 2011

Python boto aws s3 multipart uploads

Did you know that there are two ways to upload data into Amazon AWS S3?  Single Part and Multi Part uploads.  As the names suggest, the first method uploads the whole file in one shot.  The second method takes a collection of files that are sequences, uploads them separately, then when signalled that the upload is complete, assembles them into a single file.  This has a few advantages for larger files.  One can resume a failed upload by looking at the parts that are present and uploading the rest, or one can upload the parts in parallel, allowing the upload to complete faster.

What is not obvious or clear is that if a multi-part upload fails in the middle, is leaves a partially finished upload file (called a key) in S3 with a bunch of unassembled parts associated with it.  This makes sense as you could not resume a failed upload if the failed upload were automatically deleted.  However, the unfinished upload is not visible through the AWS console or the standard methods for listing files in S3 and you are charged for them, so it is useful to periodically look for them and remove them.

I discovered this while learning how to use boto in Python to interface with AWS, and much to my surprised discovered a number of failed 50GB uploads that were orphaned and costing me money.  I wrote a simple script (my first python script) to allow the enumeration and removal of the orphans.

Tuesday, November 22, 2011

Apache 1.3.41 on Windows 2008

Why you might ask would I want to install an old, depreciated version of Apache (v1.3.41) on a Windows 2008 x 32 server instance.  Well, in this case I have an application that I need to support that uses a very old version of cold fusion that only supports 1.3.x, so I don't have a choice.

This should however have been a pretty straight forward process, download apache, install it as service, start the service, confirm that it returns the default webpage, then get the application configured and running.  The only problem is that Apache would not start as a service after the installation.  It ran just fine from the command line, but when started as a service it would raise an error 1067 and exit.  The error in the event log is:

Faulting application Apache.exe, version 0.0.0.0, time stamp 0x478f7539, faulting module ApacheCore.dll, version 0.0.0.0, time stamp 0x478f7537, exception code 0xc0000005, fault offset 0x00026a7b, process id 0x9e4, application start time 0x01cca96325cefb6e.

Turns out that Windows 2008 has this security feature called "User Account Control" that prevents apache from installing properly as a service.  This can be disabled by clicking on Control Panel-> User Accounts.  Turn it off, reboot, and reinstall apache and everything is fine.

Oh, don't turn UAC back on or Apache will again refuse to start with a 1067 error.  I'm sure there is a good reason and a workaround, but I don't think it is worth spending anymore time on.

Friday, November 11, 2011

Windows Python and boto for AWS

Yeah, this is a little geeky, but I spent way too much time figuring this out so I thought that I would share.  I mostly work with Windows, but I want to do some Amazon Web Services (AWS) Scripting in Python (which I don't really know yet).  The way to do it seems to be by using a package called BOTO.  However, everyone online seems to write about BOTO and Python on Linux.

The first problem I had was that BOTO does not work with Python 3.x, but I didn't figure that out until I did a little digging as to why the setup script would not work with my Python installation.  So, only 2.x.

The next problem was that it was not really clear how to install BOTO.  It does not come in a .zip, but only in a .tar.gz format which intimidates windows folks.  Have no fear, it is not *nix only, it is just packaged that way.  Extract BOTO to a temp directly using 7zip or something else that can read tar.gz files. Then change into the directory and run 'setup.py install', which will build and install the module.

Now in order to access AWS you need to either put your credentials in a config file or pass them in your code.  The former is much easier.  All the documentation seems to indicate that you need to create a section called [credentials] in your boto.cfg file.  Hmm, where is the boto.cfg file in windows.  Can't find it.  Never did find it.  However you can set an environment variable called 'BOTO_CONFIG" that contains the path and the filename to the config file.  Easy enough.

Credential set, environment variable set, help (boto) shows that it knows where the boto config file is located... hmm, still doesn't work.  Still can't find the credentials.  Odd.  Oh wait, there is more... there is another environment variable called AWS_CREDENTIAL_FILE which should be set to the path to the file containing the [credentials] section.  Now it works.

Why was that so hard to find information about?  I have no idea.  Maybe I just missed it, hopefully this will help someone else out who has missed it also.

Tuesday, November 8, 2011

The new workout

Anyone who knows me knows that I really like going to the gym and really like lifting weights.  Unfortunately my current schedule really makes it hard to go the gym unless I get up at 5:30am, and that is not likely to happen.  I have decided to try a modified workout.

Typically I will workout for a few hours, full body weights, plus cardio plus stretching, but that just isn't happening.  Everyone keeps telling me that I should workout during lunch, but how do you walk 10 minutes each way to the gym, change, and workout.  Forget 2.5 hours, how to you do it in 60 minutes.

Well, I am modifying the workout.  I am working out in street clothes so I don't lose time changing... and am doing low reps high weight, so that I don't even really break a sweat.  I can't do too much in 30 minutes, but with HIT (High Intensity Traning) training 1 or 2 sets of 4 to 6 reps is all you need, and I can squeeze 8 mixed sets into 30 minutes.

It's only been 2 days, and it feels pretty good.  Workout heavy for 30 minutes, walk to Starbucks, get a protein smoothy and a sandwich, then back to work.  It works, except that I really want a nap by 3p.  I'm going to try to do it 4 days a week, plus a real workout on Sat or Sun.  Lets see what happens.

Monday, November 7, 2011

Outlook 2011 on the Mac will not start

We use Intermedia hosted exchange with Macs and PCs and a few Linux workstations.

One of my partners comes over and tells me that he is having a problem Outlook 2011 on his Mac Air.  When he launches it, Outlook briefly flashes the splash screen then closes.  He thinks that it may be related to some anti-virus software that he installed and uninstalled.  I have no idea.

I hit Google and find a reference to repairing damaged user profiles on Office 2011 Mac.  Launch Outlook while holding the Option key and it brings up the profiles and you can repair the profile.  Repairing goes through a few steps in which it scans the database, repairs it, makes a backup, then copies all the records.  Piece of cake, Outlook now launches and the user is up and running again.

Until... the same person comes over and asks why he is receiving alerts that he has hit his quota.  He had a 2GB quota, which lasted about 8 months, and a month ago I increased his quota to 3GB.  There is no way he should have been at his quota.  We look at his screen and see that Outlook is uploading data.  ACK!  The profile repair made outlook think that all it's data was not on the exchange server, so it was uploading everything back into exchange, an creating duplicate data. I exited outlook, launched it with the option key, created a new profile, set it as the default, then launched it and configured it with the Exchange server.

Lesson learned.  Don't fix profiles on Outlook when Outlook is connected to an Exchange Server.  Just remove the profile, create a new one, and let Outlook re-download all the data that it needs from the exchange server.  That would have been way easier and would have avoided all the duplicates.

Next posting will probably be on de-duping data in outlook...

iPad (iPhone) choices

A friend was shopping for an iPad the other day and asked the 2 question that seem to always come up (not white or black).  How many GB do I need and do I want 3G service.

My first iPad did not have 3G as I figured that I had a verizon MiFi hotspot and there was Wifi all over so I didn't need it. That worked great until I found myself on a business trip with the MiFi not working properly and no Wifi anywhere to be found.  I would gladly have subscribed to a month of the 3G service in order to have internet access, but I couldn't because I did not have the 3G model. The lesson, hedge your bets and buy the 3G model with no service, just in case.


The Memory questions is a little trickier as it really depends on the usage profile of the use.  The big memory hogs are photo's, video content, music and online publications that cache content.  If you download movies from iTunes (perhaps you travel a lot), figure that a full length film is 4GB, so you will likely want at least a 32GB device just have space enough extra space for movies.  Everything else is relatively small.  Some publications though are 100MB+ per edition and this can add up.  Podcast can take up a fair bit of space also so depending on how many old podcasts you keep on your device, it may be material.

Looking at the usage on my iphone though, I am using 17GB of 32GB.  10GB of that is music, of which I probably only listen to a small subset, but it is nice to have.  A few Apps use a lot of Memory (facebook is using 350MB, it must cache a lot of information).  I don't download podcasts or any publications or have any movies on the device, so the bulk of the difference is likely photos and videos as I take a lot and do not do a good job of maintaining the library.  With iOS5 and photo stream, your photo's end up on multiple devices, so that should be taken into account as well.

A friend recently lost their 16GB iphone and got an 8GB as a replacement and was constantly out of memory.  Lesson learned, 8GB is not enough, and apple would seem to agree as they don't even offer an 8GB model any longer.  I think that for an iPhone, 16Gb is manageable, but 32GB is better (considering that I am using 17GB currently).  64GB is overkill, at least the way that I use it.

An iPad on the other hand, which is more of a consumption device and may be caching a lot of publications (The new yorker is 150MB per issue and the NY times takes up 60MB) and movies (at 4GB each).  If you ever think you will want to put movies on it, and probably even if you don't, I would suggest not getting less that 32GB.  Just remember that as time goes on you will always use MORE memory, not less, so perhaps buying more upfront will future proof you a bit.

Tuesday, November 1, 2011

ALGO 8028 SIP Door Intercom

Installing a VOIP system in the office seemed like a good idea, but there were some subtleties that I had not counted on.  Take the front door for instance.  I should be easy to install an intercom that rings all the phone lines and allows someone to release the door and let the visitor in.  Right?  Wrong.  There are very few SIP Door Phones on the market.  I researched a number of models and it seemed like amateur hour.  Poorly constructed, ugly, even models where the release was in the unit itself, such that anyone with a screwdriver could open the unit, short two wires and trigger the door to release.

Through my research I came across the Algo 8028.  It did everything I needed, Attractive brushed steel, separate controller for security, simple browser based intercom to program it.  So I buy it, install it, configure it with my Ring Central account (which goes really well) and, um, it rings but there is no voice.  Hmm, call algo, upgrade the firmware (also easy) and voice is working but I cannot release the door.

Ok, another call to Algo, which tell me to call Ring Central, who tells me it is an Algo problem.  Grrrr.  So I email Algo a description of the problem, tell them what ring central said, and ask how to troubleshoot the issue.  The next day I get an email that they spoke to Ring Central and determined that the issue was that the that Ring Central is converting SIP DTMF to RTP audio DTMF and the Algo 8028 will not recognize RTP audio DTMF.  I appreciate the proactiveness.

Now hopefully either Algo will engineer a solution or Ring Central will change a setting and not convert the SIP DTMF. Until then, I can answer the door, but not open it.


Monday, October 24, 2011

Dell Vostro 3400

One of the guys at the office travels a lot and the Dell Vostro 3400 that he was using is a bit of a brick so we upgraded him to a nice light Toshiba Portege 800 series laptop.  When I reclaimed the Vostro, I thought that it would be prudent to reinstall it with a clean installation of Windows 7 since he had been having some issues.  Simple right?  I thought so.

First I ran some exhaustive diagnostics to try to rule out any hardware issues, and it passed, Then I had dell send me original media since he didn't provide it to me.  Dell OEM windows 7 and a drivers disc.

- Windows 7 x64 installation, no problem
- Load drivers disc... nice feature that scans the hardware and tells you what you have.  recognized everything, um, except that video and the wlan card.  Must be a mistake... so I try all the video drivers, but not of them work and I am stuck at some default resolution.  Try all the wlan drivers, none of them work.  Frustrating.

Go to the Dell website and research the laptop.  Hmm, wifi card is listed as 802.11 n network.  That doesn't help.  No guidance on the video either.  Mind you, what I write in 2 sentences took hours and hours and 2 full reinstalls of the Windows as I was sure that something MUST have gotten corrupted.

Finally I have the bright idea to ask someone else with the Vostro 3400 to look in the device manager and tell me what video card and what wlan adapter he has.

Nvideo GoForce 310M.  Hmm, that driver isn't even on the disc, but it is on the website.  Actually there are two, on labelled as switchable and one as discrete.  I have no idea what that means.  I'll just try one.

DW1501 Wireless-N wlan Half-Mini Card.  Also not on the disc but it is on the website.

Download to a USB drive from another system, install and voila, video and WLan are working properly.

Amazing.  How can Dell send out a driver disc that does not recognize the hardware in the system of have the right drivers on it?

How can searching Google not turn up ANYONE who has had this issue and figured it out.

I bet that the 32bit version of Windows 7 would have found the right drivers, though looking at 'all' drivers on the disc, I may be wrong as I do not actually see these present.

What a colossal waste of time.  At least it is working now.